Surveying Mapping Equipment » Locators » Leica Digicat i-Series
 
 

Leica Digicat i-Series

Leica Digicat i-Series

 
Download Specifications:

Leica Digicat i-Series

Making cable avoidance easier and safer

The Leica Digicat i-Series locators make ground surveys a simple and speedy task increasing on site safety. Defaulting to power mode, maximum sensitivity ensures operators are protected against lethal electrical cables, whilst additional modes are used to detect other buried utilities.
 
The Leica Digicat i-Series locators provide operators with a simple solution for underground surveys.  Designed with safety in mind, the Leica Digicat i-Series have a number of features which keep operators safe during the excavation process.
The Leica Digicat 600 & 700 i-Series provide a unique onboard memory function, which stores information on how and when the locator has been used. This information can be downloaded to your PC, tablet or mobile phone via Bluetooth® connectivity using LOGiCAT software for further analysis.
 
The Digicat 700 i-Series goes one step further with integrated GPS technology users can now see where the locator has been used, further increasing site safety and traceability of locating activities.
 
Features Digicat 500i Digicat 550i Digicat 600i Digicat 650i Digicat 700i Digicat 750i
Frequency / Mode Power mode 50 Hz or 60 Hz, Radio mode 15 kHz to 60 kHz, Transmitter mode 8 kHz and 33 kHz, Auto mode = Power + Radio mode
Depth detection (typical) Power to 3m, Radio to 2m, Transmitter mode dependant on signal transmitter or sonde
Protection Conforms to IP54
Batteries 6 x AA alkaline (IEC LR6), supplied
Battery life 40 hours intermittent use (at 20°C)
Weight 2.7kg including batteries
Depth estimation Not available

10% of depth in line or sonde
(0.3 to 3m depth range)

Not available 10% of depth in line or sonde
(0.3 to 3m depth range)
Not available 10% of depth in line or sonde
(0.3 to 3m depth range)
Bluetooth® Not available Not available Enabled Enabled Enabled Enabled
Compatibility Not available Not available CSV file compatibility program
Memory size Not available Not available 32MB memory 32MB memory 64MB memory 64MB memory
GIS mapping capability      X  X X X
Integrated GPS technology         X X
GPS type*         Chipset: u-blox®GPS, Technical Data; Type: L1 frequency, C/A code
GPS accuracy**         Position 2.5 m CEP, SBAS 2.0 m CEP
GPS start time         Cold 34s typical, Warm 34s typical, Hot 1s typical

* All data/information according to Manufacturer u-blox®GPS; Leica Geosystems does not assume any liability whatsoever for such information.
** Accuracy is dependent upon various factors including atmospheric conditions, multipath, obstructions, signal geometry and number of tracked satellites.

 
 
 
Copyright © 2008-2012 NEDO Corporation.
News      Sitemap      Blog    
Site Designed by Expansion Studios