Surveying Mapping Equipment » Locators » Leica Digisystem Accessories
 
 

Leica Digisystem Accessories

Leica Digisystem Accessories

 
Leica Digisystem Accessories
Extend your product capability
 
The Leica Digisystem has a range of accessories which extend the capabilities of the main products. The accessories, with the exception of the Digimouse Standard Sonde and MAXiSONDE are used in conjunction with the Leica Digicat locators and Leica Digitex signal transmitters to trace the more tricky buried utilities such as sewers and ducts.
 
Accessories are an important part of the Leica Digisystem range and are frequently used in conjunction with the Digicat locators and Digitex signal transmitters, to improve the detection of buried utilities which may have a poor or no traceable signal on them.  They can also be used to trace buried utilities which may be of non-metallic construction.
 
 
   

Digitrace
The Digitrace enables non-metallic drains, ducts or pipes, up to 150mm in diameter, to be traced when used in conjunction with the Leica Digicat and Digitex signal transmitter.

The Digitrace’s coiled fibre-glass rod, which protects the central copper tracing conductor, is available in lengths of 30 metres, 50 metres or 80 metres.

The fibre-glass rod is inserted and pushed along in the utility under investigation. The Leica Digitex is connected and the tracing signal is located on the surface by the Leica Digicat.

         
   

Property Connection Set
The property connection set provides a safe technique of applying a traceable signal to live electricity cables going to a domestic dwelling or similar.  It is connected to the Leica Digitex signal transmitter and a live electrical socket.

The electrical supply is not interrupted by the applied signal and the risk of serious injury is greatly reduced.

         
    Signal Clamp (33kHz)
100 mm clamp used in conjunction with the Digitex signal transmitter, with a 33 kHz output, to apply a traceable signal to conductive buried utilities such as cables or pipes.
         
    Multi Clamp (512 Hz to 33 kHz)
80 mm clamp used in conjunction with the Leica Digitex to apply a traceable signal to conductive buried utilities such as cables or pipes. The Multi Clamp is compatible with Leica Digitex signal transmitters with an output of 512 Hz to 33 kHz.
         
   

Digimouse Standard Sonde (8 kHz & 33 kHz)
Compact dual frequency sonde used to trace drains, sewers and other non-conductive utilities. Digimouse Standard Sonde can be attached to a range of equipment including drain rods, boring tools and inspection cameras.

Powered by 1x AA alkaline battery, with a depth range of 5 metres.

         
   

MAXiSONDE (512 Hz to 33 kHz)
A 55 mm diameter dual frequency sonde used to trace deep lying drains, sewers and other non-conductive utilities. MAXiSONDE can be attached to a range of equipment including drain rods, boring tools and inspection cameras.

Powered by 3 x AA alkaline batteries, with a depth range of 12 metres.

         
     

Leica Digitex Connection Cable Set Extension
The Leica Digitex connection cable set extension provides operators with an additional 10 metres of cable.  This is used to extend the red or black cable of the Digitex connection cable set.

Features Digitrace 30 / 50 / 80 Signal Clamp Digimouse Standard Sonde Property Connection Multi Clamp MAXiSONDE
8 kHz Mode Dependent on Transmitter   x   x x
33 kHz Mode Dependent on Transmitter x x x x x
Mixed 8/33 Dependent on Transmitter       x  
512 Hz Mode Dependent on Transmitter       x  
640 Hz Mode Dependent on Transmitter       x  
Protection IP54 IP54 IP68 IP54 IP54 IP68 Submersion level: 3 bar pressure, 30m water
Working Temperature Not required -20°C to +50°C -20°C to +50°C -20°C to +50°C -20°C to +50°C -20°C to +50°C
Battery Type Not required Not required 1 x LR6 (AA) alkaline Not required Not required 3 x LR6 (AA) Alkaline
Weight 3 kg / 3.25 kg / 3.5 kg 354g 0.18kg 150g 820g 830g
Dimensions Frame - 490mm (H) x 210mm (D) x 440mm (W) 40mm (H) x 250mm (D) x 142mm (W) exc Cable Internal diameter 100mm 38mm (D) x 120mm (W) 40mm (H) x 80mm (D) x 100mm (W) 56mm (H) x 250mm (D) x 130mm (W) Internal Diameter 80mm 300mm (L) x 55mm Diameter

 

 
 
 
Copyright © 2008-2012 NEDO Corporation.
News      Sitemap      Blog    
Site Designed by Expansion Studios